Showing posts with label 2012 Husaberg. Show all posts
Showing posts with label 2012 Husaberg. Show all posts

2012 Husaberg TE300


"The bigger the better" applies to all those who want to be insufficient to ground reserves. When the question of optimal power to weight ratio of the E3 class large, no one above the TE 300 This center offers the ideal cross between a feather and the torque of the phenomenon.

+ Sealed cartridge forks

Reactivity + unmatched

+ Damping constant throughout the entire suspension travel

+ Unbeatable power to weight ratio of a typical two-stroke

+ It is more difficult terrain, the greater the benefit

+ Energy saving electric starter

+ Add to bend the power switch on the handlebar allows the individual characteristics of the motor control

+ Minimum cost for the acquisition and maintenance

+ Simple Technology, tried and tested as a basis for the maximum enjoyment enduro




2012 Husaberg TE300 Review
2012 Husaberg TE300
 2012 Husaberg TE300 Features and Benefits

New handlebar Neken the same way as before, ensuring rigidity and safety.

Classy machined triple clamps from a single sheet is fitted as standard on all models Husaberg. This results in a precision clamping of the fork tube, which supports the smooth operation of the fork.

The fuel tank polyethylene TE models designed to reach a sufficient combined with the ergonomics of enduro and therefore transmits optimum contact with the bike. With a capacity of 11 liters, large enough to fill stadiums in the longer race with ease and also extended endurance runs.

Superb luxury sophisticated chassis closed cartridge technology - extremely sensitive + excellent damping characteristics, as the "big bikes" + listen to its low weight

The liquid cooling system water cooling leads directly from the cylinder head by the triangle frame via a T-bar and straight to the radiators. This means easy installation of radiators, plenty of space under the fuel tank and thus the air flow smoothly.

Nickel exhaust pipe is specially designed for endurance and contributes significantly to the controllable maneuverability combined with the high level of performance. The main products of aluminum silencer manufactured in a two-component fits snugly in the crib with a solid plastic case.



2012 Husaberg TE300 specs
2012 Husaberg TE300
The air box provides high-volume optimal engine with the air fresh and clean. The spacious air filter foam Twin Air can be changed in seconds - no tools at all.

Design stable and also very light steel pipe made of high quality chrome molybdenum and profiles ensures that the central beam provides an ideal level of strength and flexibility. This ensures the highest degree of directional stability and torsional rigidity.

State-of-the-art technology Brembo brakes. Light, floating two-piston caliper front and a compact single-piston caliper rear disc brakes in combination with very light wave, to provide the best possible application of maximum braking power.

New-cylinder torque at low revs (T 300) power development + + fist spontaneous very driveable at low speeds, a huge rear tire grip + more than enough power for top speed to climb the steep hill with ease of + the motor speed according to the exhaust and a new reed valve block until more gas: In addition, there are two sources of control, which offer adjustable features of the development of power that can be adjusted to be softer and pull-oriented, or more aggressively for the spontaneous power.

The digital ignition is factory fitted with a new ignition curve more compact on the handlebars, allowing the selection of two different ignition curves, while riding + rider can choose between "soft" - which is more sweet, more performance oriented traction - or "aggressive" with performances much more spontaneous.

Electric Starter for use enduro Hardcore, thanks to a highly qualified patent behind the exhaust, which saves space and well protected, ideal when the force of the rider in perilous terrain fades.

Practice Brembo hydraulic clutch control, the optimal application designed specifically for the two characteristic times, always with a precise pressure point.

+ Compact and extra-light 2-stroke engine with a displacement of 249 cc, 293.2 cc, and now with 124.8 cc Enduro + + specific features of the engine exhaust control is regulated by the centrifugal force and ignition adjustable to adjust the characteristics of the engine to the needs of the rider or the terrain rugged six-speed + especially designed to use real enduro + + smooth hydraulic clutch patented electric starter

Super slim ergonomic design for maximum freedom of movement, perfect compromise between rider and the bike can handle a fun, typical appearance and good graphics Husaberg

More about2012 Husaberg TE300

2012 Husaberg TE250 Review


Tailor-made for fierce competition in the category's most competitive sports enduro E2. Agile and highly efficient two-stroke engine shows its strength especially when a heavy four-stroke really begins to sweat. The only things that fall, then, are the weight, strength, smooth delivery and management playful.

+ Sealed cartridge forks

+ Reactivity unprecedented

+ Damping constant throughout the entire suspension travel

+ Unbeatable power to weight ratio of the typical two-stroke

+ A most difficult terrain, the greater the benefit

+ Energy saving electric starter

+ Add to bend the power switch on the handlebar allows the individual characteristics of the motor control

+ Minimum cost for the acquisition and maintenance

+ Simple Technology, tested as a basis for maximum enjoyment enduro



2012 Husaberg TE250
2012 Husaberg TE250
2012 Husaberg TE250 Features and Benefits

Neken new guide, with the same form as before, guarantees supreme rigidity and safety.

Seatposts machined in one piece with class are standard on all models Husaberg. This translates into a fork tube clamp accuracy, which supports the smooth functioning of the holder.

The fuel tank polyethylene TE models designed to reach a sufficient combined with the ergonomics of enduro and therefore transmits optimum contact with the bike. With a capacity of 11 liters, large enough to fill stadiums in the longer race with ease and also extended endurance runs.

Unbeatable for cutting-edge of the platform, with sophisticated closed cartridge technology - a high sensitivity + an optimum damping properties, such as the "big wheel" + light tuned

An ingenious system of liquid cooling water goes directly into the cylinder head through the frame triangle and via a T-fitting directly to the radiators. This means that a simple installation of radiators, ample space under the fuel tank and, consequently, an unobstructed air circulation.

Nickel-plated exhaust pipe is specially designed for enduro use, and contribute significantly to the control of driving, combined with higher performance. Aluminum muffler of the most important two-part process is fully inserted the sleeve of strong plastic frame.

The air box provides high-volume optimal engine with the air fresh and clean. The spacious air filter foam Twin Air can be changed in seconds - no tools at all.

Stable and at the same time, an extremely light structure made of tubes of high quality chrome molybdenum steel and profiles to ensure that the central tubular frame offers the ideal level of power and flexibility. This ensures the highest degree of directional stability and torsional rigidity.



2012 Husaberg TE250
2012 Husaberg TE250
The state of the art technologies of Brembo brakes. A light twin-piston floating brake calipers on the front and a compact piston floating calliper at the rear, with lightweight wave brake discs provide the best possible application and the maximum braking performance.

New-cylinder torque at low revs (T 300) power development + + fist spontaneous very driveable at low speeds, a huge rear tire grip + more than enough power for top speed to climb the steep hill with ease of + the motor speed according to the exhaust and a new reed valve block until more gas: In addition, there are two sources of control, which offer adjustable features of the development of power that can be adjusted to be softer and pull-oriented, or more aggressively for the spontaneous power.

Digital switch is factory-equipped with a power switch on the new compact curved handlebars that can be selected from two different ignition curves racing + driver can choose between "soft" - that is smoother, more pull-oriented results - or "aggressive" with the performance much more spontaneously.

Hard enduro use electric starter, which makes very clever patent, is hidden in the flue gas, which saves space and well-protected, full strength when the pilot is in decline in a treacherous terrain.

Practice Brembo hydraulic clutch control, the optimal application designed specifically for the two characteristic times, always with a precise pressure point.

+ Compact and extra-light 2-stroke engine with a displacement of 249 cc, 293.2 cc, and now with 124.8 cc Enduro + + specific features of the engine exhaust control is regulated by the centrifugal force and ignition adjustable to adjust the characteristics of the engine to the needs of the rider or the terrain rugged six-speed + especially designed to use real enduro + + smooth hydraulic clutch patented electric starter

Super slim ergonomic design for maximum freedom of movement, perfect compromise between rider and the bike can handle a fun, typical appearance and good graphics Husaberg

More about2012 Husaberg TE250 Review

2012 Husaberg TE125 Review


The youngest member of the family Husaberg rounded area at the bottom. This means that a promising 16-year-old racing, and an ambitious E1 riders of all ages can now also be used for high-end components can provide only a Husaberg. Lightweight, compact, agile - there's too much tea 125 grams

+ Sealed cartridge forks

Reactivity + unmatched

+ Constant damping throughout the suspension travel

+ Unbeatable power to weight ratio of the typical two-stroke

+ It is more difficult terrain, the greater the benefit

+ At least the acquisition and maintenance of

+ Simple Technology, tried and tested as a basis for the maximum enjoyment enduro




2012 Husaberg TE125
2012 Husaberg TE125
2012 Husaberg TE125 Features and Benefits

New handlebar Neken the same way as before, ensuring rigidity and safety.

Classy machined triple clamps from a single sheet is fitted as standard on all models Husaberg. This results in a precision clamping of the fork tube, which supports the smooth operation of the fork.

The fuel tank polyethylene TE models designed to reach a sufficient combined with the ergonomics of enduro and therefore transmits optimum contact with the bike. With a capacity of 11 liters, large enough to fill stadiums in the longer race with ease and also extended endurance runs.

Superb luxury sophisticated chassis closed cartridge technology - extremely sensitive + excellent damping characteristics, as the "big bikes" + listen to its low weight



2012 Husaberg TE125
2012 Husaberg TE125
The liquid cooling system water cooling leads directly from the cylinder head by the triangle frame via a T-bar and straight to the radiators. This means easy installation of radiators, plenty of space under the fuel tank and thus the air flow smoothly.

The exhaust pipe nickel is specially designed for enduro use, contributing significantly to the controllable maneuverability combined with the best performance. The aluminum muffler made by a process leading to two components is fixed perfectly to the frame with a plastic sleeve solid.

The air box provides high-volume optimal engine with the air fresh and clean. The spacious air filter foam Twin Air can be changed in seconds - no tools at all.

Stable and at the same time, an extremely light structure made of tubes of high quality chrome molybdenum steel and profiles to ensure that the central tubular frame offers the ideal level of power and flexibility. This ensures the highest degree of directional stability and torsional rigidity.

State-of-the-art technology Brembo brakes. Light, floating two-piston caliper front and a compact single-piston caliper rear disc brakes in combination with very light wave, to provide the best possible application of maximum braking power.

New cylinder to a low-speed torque (TE 300) + + power development can hit very spontaneous at low speed to remove the rear wheel + more powerful than enough in the upper rev range to climb slopes directly the ease with +-dependent control engine speed exhaust valves again to lock the throttle response, even better, with two springs provide more control functions that allow adjustment of the energy development to be granted to be smoother and more focused on traction or spontaneous power more aggressive.

The digital power plant is equipped with an ignition switch to the new, more compact curve in the handle that allows the selection of two different ignition curves driving + the driver can choose between "soft" - which means smoother, more performance-oriented traction - or "aggressive" with performances much more spontaneous.

Hard enduro use electric starter, which makes very clever patent, is hidden in the flue gas, which saves space and well-protected, full strength when the pilot is in decline in a treacherous terrain.

Convenient drive by Brembo hydraulic clutch, the optimal application is specifically designed for a two-stroke characteristics, always the exact point of pressure.

+ Compact and super lightweight 2-stroke engine with a displacement of 249 cc, 293.2 and 124.8 cc enduro with now + + specific features of the engine exhaust control regulated by the centrifugal force and can adjustable ignition engine adjustment needs of the pilot or the rugged terrain + six-speed transmission designed specifically for use real enduro + + soft patented hydraulic clutch electric starter

Sleek ergonomic movement ideal, the total involvement of the rider and the bike makes a playful treatment of the typical aspect of Husaberg and crisp graphics

More about2012 Husaberg TE125 Review

Husaberg FE570 2012 Review


Husaberg Enduro exceptional power: Brute force, all in a pure and supreme handling ergonomics. It leaves nothing to be desired in terms of performance and torque, even when faced with the toughest requirements. What more could you want.

Mass centralization with 70 + engine design ·

+ The optimal position of the center of gravity

+ Responsibility

+ Application of exact power with EFI

+ Provision of harmonic power in every situation

+ Drive because of the engine and weight distribution

+ Engine Interchangeability forward the use of force

Closing + cartridge forks

+ Reactivity unprecedented

+ Constant damping throughout the suspension travel

+ Optimized for fast and bumpy terrain




Husaberg FE570 2012
Husaberg FE570 2012
 Husaberg FE570 2012 Features and Benefits

WP USD closed cartridge forks last 48 mm in diameter represents a new dimension in suspension enduro. Fully adjustable 48 mm forks WP Suspension guarantee a comfortable response and high attenuation can afford. Together with CNC machined triple clamps, this ensures better control of the front wheel secured.

Particularly light and high-quality aluminum, the silencer complies with all legal noise limits.

The lightweight design of double perimeter support ensures the highest level of torsional rigidity and provides directional stability. Extremely thin tube bottom of the loop. General minimum width. Excellent ground clearance.

High-strength aluminum alloy Neken tapered head ensures the highest degree of rigidity and safety. Mounted in four different positions.

Cross-linked polyethylene ensures maximum strength while reducing weight. Various electronic components can be completely immersed in the subframe. Now black.

Seatposts machined in one piece with class are standard on all models Husaberg. This translates into a fork tube clamp accuracy, which supports the smooth functioning of the holder.

Located directly behind the fuel cap, it is covered by the front seat. The position of the raised air filter box ensures a fresh, clean air intake and the maximum depth wading. Inlet filter for reimbursement directly to the cylinder.

Capacity of 8.5 liters, the reservoir extends under the seat very thin, which creates a favorable center of gravity, and is equipped with a compact, fuel pump, and to reserve the sensor. Transparent polyethylene also enables the fuel level is determined from the outside.




Husaberg FE570 2012
Husaberg FE570 2012
The exhaust manifold integrated stainless steel provides maximum protection against damage caused by rocks and avoid direct contact with the rider.

The Brembo front brake for the last maximum braking power with minimal effort. Effective single-piston rear brake caliper. Washers wave ultra-light optimal deceleration and effective self-cleaning of the brakes.

The fully adjustable PDS shock absorber settings are optimized for even better traction and stability. The rebound damping and a variable high and low speed compression damping guarantees the perfect composition of a wide variety of conditions.

Engine design + Sport-oriented revolutionary compact layout + low + better engine, 70 ° cylinder angle and position of the drive shaft near the wheel center of gravity + + easy to start a high reliability of the test

Start with a push of a button, in any situation precisely controlled using state of the art motor control, no need of a kickstart, engine weight to a minimum

+ 42 mm throttle body air flow straight down the air flow from the airbox to the cylinder + 2 descriptions of selected option (available Husaberg the map selector)

Retainer valve spring back due to high equipment reliability to ensure better under heavy loads in the higher ranks of turns.

All engine versions are equipped with a perfect 6-speed rated, with a narrow spread in the FX.

Designed for extreme loads, the control of Magura hydraulic clutch, integrated torque damper, the perfect application, FLEX clutch lever, hinge forward 90 degrees, reduces the risk of rupture

Greater rigidity, the engineers are much stronger than the area around the structure of the control head 4-stroke models, reducing the frame to flex crucial bike much more stable at high speed, very precise control of front wheel

Super-light aluminum swingarm, owns, directly connected to the PDS shock, the maximum degree of directional stability, high grip and comfort

More aboutHusaberg FE570 2012 Review

2012 Husaberg FE390 Review


Less often can be more than enough. Especially when the driver has to be economical with their energy and the situation becomes really difficult. The youngest member of the family four times Husaberg development of soft power, with enough power for any situation enduro everyday use.

Mass centralization with 70 + engine design ·

+ Optimal positioning of the center of gravity

+ Drivers

+ Power precise application with EFI

+ Provision of harmonic power in every situation

+ Drive because of the engine and weight distribution

+ Convertibility of power in the propulsion

+ Closed cartridge fork

+ Reactivity unprecedented

+ Damping constant throughout the entire suspension travel

+ Optimized for fast and rutted terrain
 
2012 Husaberg FE390
2012 Husaberg FE390 Features and Benefits

The last WP USD closed cartridge fork with 48 mm diameter means a new dimension in suspension enduro. The 48 mm fully adjustable forks from WP Suspension guarantee response at ease and the reserves of high attenuation. In conjunction with CNC triple clamps, ensuring a more secure front wheel.

Especially light and made of high quality aluminum, which ensures that the silencer complies with all legal noise limits.

The lightweight design of double perimeter support ensures the highest level of torsional rigidity and provides directional stability. Extremely thin tube bottom of the loop. General minimum width. Excellent ground clearance.

High strength aluminum alloy Neken tapered handlebar guarantees maximum rigidity and safety. Mounted in 4 different positions.

XLPE guarantees the highest levels of power at the same time reducing weight. Many electronic components are perfectly integrated into the crib. However, in black.

Classy triple clamps are machined from a single standard on all models of Husaberg. This leads to the exact connection of the fork tubes, which maintains the integrity of operation of the forks.

Placed directly behind the fuel cap, which is covered by the front seat. The elevated position ensures the freshness of the airbox, the entry of clean air and maximum wading depth. Inflow of air into the cylinder direct descendant of the filter.

Capacity of 8.5 liters fuel tank extends very thin under the seat, providing a favorable center of gravity, and is equipped with a fuel pump and a reservoir of compact sensor. The clear polyethylene allows the fuel level is determined from the outside.

The exhaust manifold integrated stainless steel provides maximum protection against damage caused by rocks and avoid direct contact with the rider.

Last Brembo front brakes for optimum performance, and with minimal effort. Powerful single piston rear brake caliper. Ultralight wave plates the optimum deceleration

and effective self-cleaning of the brakes.

Fully adjustable PDS shock with settings optimized for better traction and stability even better. Adjustable trigger and variable high and low speed compression damping guarantees the perfect setting for a variety of conditions.

+ Sports-oriented design with compact engine Revolutionary + + minimizes the optimal management of 70 ° cylinder angle and position of the crankshaft near the center of gravity of the bike + + easy hightest starting reliability

Start with a push of a button, in any situation precisely controlled using state of the art motor control, no need of a kickstart, engine weight to a minimum

42 mm throttle body in the flow of direct downdraft optimum + air box to select the alternative assignments cylinder + 2 (Card switch available as Husaberg room)

New door-valve spring made of stronger materials to ensure greater reliability under heavy load in the range of the highest speed.

All engine versions are equipped with a perfect 6-speed rated, with a narrow spread in the FX.

Designed for extreme loads, hydraulic clutch control of Magura, cushion couple integrated Flex application perfect clutch, hinge forward until 90 degrees, reduces the risk of fracture

Greater rigidity, the engineers are much stronger than the area around the structure of the control head 4-stroke models, reducing the frame to flex crucial bike much more stable at high speed, very precise control of front wheel

Super-lightweight cast aluminum swing arm, holds directly affiliated with the PDS shock greater degree of directional stability, great traction and comfort

More about2012 Husaberg FE390 Review

2012 Husaberg FE450 Review


The perfect tool for the E2 class: Swedish steel with all power and incomparable handling. Models Enduro four-stroke, as everyone knows, is an intelligent technology and constant innovation to the smallest detail.

+ 70 ° with a mass concentration of motor

+ Optimal location of center of gravity

+ Manageability

+ Application of exact power with EFI

Shipping + harmonic power in all situations

+ Traction because of engine performance and weight distribution

+ Engine Interchangeability forward the use of force

+ Closed cartridge fork

Reactivity top +

+ Damping constant throughout the entire suspension travel

+ Optimized for fast terrain and bumpy
 
2012 Husaberg FE450
2012 Husaberg FE450 Features and Benefits

The last WP USD closed cartridge fork with a diameter of 48 mm means a new dimension in the area of ​​suspension enduro. The fully adjustable 48 mm forks WP suspension ensures a comfortable and important response of depreciation reserves. In conjunction with CNC triple clamps, ensuring a more secure control of the front wheel.

Especially light and made of high quality aluminum, which ensures that the silencer complies with all legal noise limits.

Lightweight double-cradle steel perimeter design ensures the greatest torsional rigidity and towards ensuring stability. Ultra-thin rings downtube. A small overall width. Ground clearance unbeatable.

High-strength aluminum alloy Neken tapered head ensures the highest degree of rigidity and safety. Mounted in four different positions.
 
2012 Husaberg FE450
XLPE guarantees the highest levels of power in the same time as the reduced weight. Many electronic components are perfectly integrated into the frame. Now in black.

Classy triple clamps are machined from a single standard on all models of Husaberg. This leads to the exact connection of the fork tubes, which maintains the integrity of operation of the forks.

Located directly behind the fuel cap, it is covered by the front seat. The position of the raised air filter box ensures a fresh, clean air intake and the maximum depth wading. Inlet filter for reimbursement directly to the cylinder.

The 8.5-liter fuel tank Slim extends well below the seat, giving a positive density, and is equipped with a compact fuel pump and a replacement sensor. The clear polyethylene allows the fuel level to be determined from the outside.

Integrated stainless steel exhaust manifold offers optimum protection against damage from stones and blocks direct access to the rider.

Brembo front brakes for optimum braking performance with minimal effort spent. Effective single-piston rear brake clamp. Discos wave ultra-lightweight for maximum deceleration

self-cleaning and effective braking.

Fully adjustable PDS shock with settings optimized for better traction and stability, even better. Adjustable rebound and compression damping variable speed high and low ensures the perfect setup for various conditions.

+ Sports-oriented design with compact engine Revolutionary + + minimizes the optimal management of 70 ° cylinder angle and position of the crankshaft near the center of gravity of the bike + + easy hightest starting reliability

Since the push of a button in each situation through the state of the art engine management system precisely controlled without the necessity of engine weight to a minimum

42 mm throttle body in the flow of direct downdraft optimum + air box to select the alternative assignments cylinder + 2 (Card switch available as Husaberg room)

A new valve spring housing more resistant materials for improved reliability in the presence of heavy loads for the higher rev range.

All versions are equipped with motors of a transmission 6 and gradual, with a narrow margin in the FX.

Designed for extreme loads, hydraulic clutch control of Magura, cushion couple integrated Flex application perfect clutch, hinge forward until 90 degrees, reduces the risk of fracture

For greater rigidity, the engineers have increased considerably in the frame around the steering head 4-stroke models, flexible frame reduced at decisive points, a greatly improved stability of the bike at high speed, control clear of the front wheel

Super-light aluminum swingarm, owns, directly connected to the PDS shock, the maximum degree of directional stability, high grip and comfort.

More about2012 Husaberg FE450 Review